Bug: Plot chunks disappear in build mode
Plot chunks disappear in build mode
| Status: | Pending Moderation |
| Priority: |
High |
| Added by: | Anonymous on June 19, '26 |
| Assigned to: |
Unassigned
|
| Due date: | |
| Reported for: | |
| Roblox Id: |
Not set
|
Steps to Reproduce
- Enter build mode
- Place items, walls ect across all edges of the plot
- Reach at least 10% plot data (ideally 15-20)
- Wait a few minutes, move around a bit
- (Exit and re-entering build mode makes it worse)
- (Re-joining may briefly help)
Explanation
Large chunks of my plot will disappear while in build mode. It has happened around all sides of the plot-edge, but mostly the far left side. If I have a floor placed both in the loaded area and the area that unloads the floor stays. I can place items on the ground (if it’s loaded) and I can also place walls but they disappear immediately after placing. I’ve had the disappearing chunks re-load very briefly (1-3 seconds) but more often then not it will not re-load at all. This issue happens almost any time I load and has been going on for a few months, it happens shortly after joining/ entering build mode (within 2 minutes). My largest plot which this happens the most frequently to is still only about 19%
Watchers
Screenshots
Screenshots are not visible to you
This project restricts screenshot visibility.Video Clips
None
Log Files
None
Device
No device information
You don't have permission to comment on this issue.