Simple Bed Comforter Automatically Applies Sideways

Status:	Pending Moderation
Priority:	Medium
Added by:	Anonymous on September 17, '26
Assigned to:	Unassigned
Due date:
Roblox Id:	Not set

Steps to Reproduce

1. open build mode
2. decorate
3. decorations
4. Miscellaneous
5. Simple bed comforters
6. notice that it applies sideways
7. attempts smaller grid size
8. automatically turns sideways again

Explanation

I am writing to formally report an ongoing and recurring issue that I have been experiencing with the Simple Bed comforters. I have noticed this problem on multiple occasions over a period of time, and despite attempting a number of different methods to correct or work around the issue, I have been unable to find a reliable solution.

The main issue I am experiencing is that whenever I attempt to place a Simple Bed comforter onto a bed, the comforter automatically applies in the incorrect orientation. Instead of being positioned correctly across the bed, the comforter consistently appears sideways. This happens automatically when I initially place the comforter, rather than being something that occurs because of an accidental placement or incorrect positioning on my part.

I have tried to determine whether this issue is connected to a particular bed, bed size, or bed design. However, based on my experience, it does not appear to be isolated to one specific type of bed. I have experienced the same issue across multiple different beds, including both single and double beds. This has led me to believe that the problem may be related specifically to the Simple Bed comforter itself, rather than being caused by one particular bed model or size.

I have also attempted to resolve the issue by changing the grid size when placing the comforter. Initially, I thought that using a smaller grid might allow me to position the comforter more accurately and prevent it from automatically rotating or applying sideways. Unfortunately, this has not fixed the problem. Even when using a smaller grid and taking extra care with the placement, the comforter still ends up returning to the same sideways orientation.

I have tried manually adjusting the comforter after placing it, as well as experimenting with different placement positions and angles. While these attempts may temporarily change the appearance or position of the comforter, they do not provide a permanent solution. The comforter continues to revert to the incorrect sideways orientation, meaning that I am unable to consistently get it to sit in the correct direction.

Another reason I believe this is an issue that should be investigated is the consistency with which it occurs. This does not seem to be an occasional problem that happens once in a while due to a particular placement. Instead, I have noticed the same behaviour repeatedly. Whenever I attempt to use the Simple Bed comforter, there is a strong tendency for it to automatically apply sideways. Because I have experienced this multiple times, I believe that there may be an underlying issue affecting the way the comforter is configured or recognised when it is placed onto a bed.

I have also considered whether the issue could be caused by the size of the bed. However, after testing the comforter with different bed sizes, I have found that the same problem can occur regardless of whether the bed is a single or double. This makes it unlikely that the issue is simply caused by the comforter being too large or too small for a particular bed.

I have tried approaching the problem in several different ways rather than immediately reporting it. I initially assumed that I may have been placing the item incorrectly or that there might have been a specific method required to position it properly. I therefore experimented with different grid sizes, placement locations, orientations and methods of adjusting the comforter. Despite these attempts, the issue has continued.

I have also tried correcting the comforter after it has been placed sideways. However, even when I manage to adjust it, it does not seem to remain in the intended orientation. Instead, it eventually ends up sideways again. This makes the problem particularly frustrating because it means that manually correcting the item does not appear to be a dependable workaround.

I first noticed this issue some time ago, but I have only recently decided to formally report it. The reason I did not report it immediately was because I assumed that it may have been a temporary problem, or that it might have been something that would be fixed in a future update. I also wanted to make sure that I had properly tested different possibilities before reporting the issue, rather than reporting something that could potentially have been caused by incorrect placement.

However, after encountering the same problem repeatedly, I believe it is now appropriate to bring it to your attention. I had expected that an issue occurring this consistently may have already been identified and resolved, but unfortunately, I am still experiencing it.

The issue is also not limited to one particular situation. From what I have observed, it can happen when using different beds and different bed sizes. I have not found a specific combination of bed, placement location or grid size that consistently prevents the problem from occurring. This suggests that the issue may be more general and could potentially affect the Simple Bed comforter whenever it is used.

To summarise the problem, the expected behaviour is that the Simple Bed comforter should automatically apply to the bed in the correct orientation, with the length and width of the comforter matching the corresponding dimensions of the bed. Instead, the actual behaviour I am experiencing is that the comforter automatically applies sideways. Changing the grid size does not permanently correct the issue, and manually repositioning the comforter does not appear to provide a reliable long-term solution.

Expected behaviour:
The Simple Bed comforter should be placed onto the bed in the correct orientation automatically. It should align with the dimensions and direction of the bed and remain in that correct position after being placed.

Actual behaviour:
The Simple Bed comforter automatically applies sideways when I attempt to place it. This occurs across different bed types and sizes, including single and double beds. Adjusting the grid size or attempting to manually reposition the comforter does not permanently resolve the issue, as it eventually returns to or remains in the incorrect sideways orientation.

Troubleshooting I have attempted:

• Using different grid sizes when placing the comforter.
• Trying a smaller grid size for more precise placement.
• Attempting to manually rotate and reposition the comforter.
• Trying different areas of the bed.
• Testing the comforter on different bed types.
• Testing both single and double beds.
• Repeatedly removing and placing the comforter again.
• Attempting different placement angles and positions.
• Checking whether the issue was specific to one particular bed.
• Trying to correct the orientation after the comforter had already been placed.
• Repeating the process multiple times to determine whether the issue was simply an occasional placement error.

Unfortunately, none of these methods have resulted in a consistent or permanent fix. The issue continues to occur despite the different troubleshooting methods I have attempted.

I believe this issue would be worth investigating because it affects the basic functionality and usability of the Simple Bed comforter. When an item is intended to be used on a bed, it would reasonably be expected to orient itself correctly according to the bed's dimensions and direction. Having the comforter repeatedly apply sideways makes it difficult to achieve the intended appearance and can require unnecessary additional adjustments.

I am also reporting this because I want to make sure that the issue is properly documented. Although it may seem like a relatively small problem, the fact that it happens repeatedly and across multiple bed types makes me think that it may be caused by something within the item's setup rather than being an isolated placement issue.

I understand that technical issues can sometimes be difficult to identify, particularly when they may depend on specific objects, settings or placement conditions. For that reason, I have tried to provide as much information as possible about what I have experienced. I hope that the details above can help with identifying whether there is an issue with the comforter's orientation, placement settings, grid behaviour, object rotation or compatibility with different bed types.

If possible, I would appreciate it if the Simple Bed comforter could be checked to determine whether its default orientation or placement settings are causing it to automatically apply sideways. It may also be useful to check whether the comforter's dimensions, rotation settings or attachment points are configured correctly for both single and double beds.

I would also appreciate clarification if there is currently a recommended method for placing the comforter correctly that I may not have discovered. I have attempted several different methods myself, but so far I have not found one that consistently works.

I have noticed this issue enough times that I feel confident that it is not simply a one-off occurrence. It has happened repeatedly, and the fact that it occurs across different bed sizes and types makes it particularly noticeable. I initially thought that the issue would likely be resolved over time, which is why I did not report it earlier, but as I am still encountering it, I thought it was important to bring it to your attention.

Overall, the main issue is that the Simple Bed comforter does not appear to recognise or maintain the correct orientation when being placed onto a bed. Instead, it automatically applies sideways, and the usual methods of adjusting the placement do not appear to resolve the problem. This has occurred with both single and double beds and does not appear to be restricted to any specific bed type.

I hope this report provides enough information to help identify and investigate the issue. I would be grateful if this could be looked into and, if necessary, addressed in a future update or fix. I appreciate that identifying and resolving technical issues can take time, and I understand that further information may be required to reproduce the problem. I am happy to provide additional details about the issue if needed.

Thank you for taking the time to read through this report and for looking into the recurring issue with the Simple Bed comforters. I hope that reporting it in detail will help with identifying the cause and eventually finding a permanent solution.

Watchers

Watch