During my gameplay, while I build the Ultra Mech Assembly Line, I used an Adv...

Status:	Duplicate
Added by:	Anonymous on April 29, '26
Reported for:	0.8.5 Auto

Steps to Reproduce

No steps to reproduce

Explanation

During my gameplay, while I build the Ultra Mech Assembly Line, I used an Advanced Stamper to separate parts the I am going to use from another possible use. However, after configuration, I observed that part of the cut that was suppose to be cut out, is being duplicated. In the screenshot, it is highlighted in red. You can see that it is selected (in blue) to be cutout, but copies in both outputs. It is not a game-breaking bug, but I could reduce my factory a bit without it, and free space.

Device Info
Device: Inspiron 7559 (Dell Inc.)
CPU: Intel(R) Core(TM) i7-6700HQ CPU @ 2.60GHz
RAM: 8064 MB
GPU: NVIDIA GeForce GTX 960M

Attached Files
Screenshot/Video: https://drive.google.com/open?id=1YQMDSXar4vBvAhJYaPDG8s4CS5MNj49x

Report Info
Version: 1.0.4-pre.7+171731a9.4298
Player-rated impact score: 7/10
Steam Username: Glccasanova
Steam ID: 76561198316939965
Game-breaking/crash: No
Cloud Service ID: 4658ECE682220750
GameAnalytics ID: 1c48443d-55f4-4fbf-ae49-4647a44b9cf7
Submitted via Google Form: 29/04/2026 17:28:58

Watchers

Watch