Chainsaw feathering intermittently ignores right click inputs

Status:	Pending Moderation
Priority:	High
Added by:	Anonymous on October 1, '26
Assigned to:	Unassigned
Due date:
Reported for:	10.1.2
Actual Result:	Chainsaw does not always register right clicks when feathering
Expected Result:	chainsaw will not charge when pressing right click somewhat fast. (Pressing and letting go every .5 seconds or so)
Severity:	Major
Reproducibility:	Frequently
Platform:	Steam
Additional Notes & Comments:	Not set

Steps to Reproduce

1. Set killer interaction behaviour to toggle
2. Load into a match and feather billy's chainsaw
3. While rapidly press right click, you will see that the chainsaw does not always register the right click input.

Explanation

While feathering billy's chainsaw, it occasionally does not register right click inputs. It seems to happen to about 30% of the right clicks that you make. You start rapidly tapping right click to feather, and you'll notice that the chainsaw bar rapidly goes down despite you pressing right click. Every now and then, you'll hold right click to actually start the chainsaw attack and it will fully not register and start to regress. This only occurs if the killer interaction behaviour is set to toggle.

Watchers

Watch